An unknown line is treated like a possible lead line: it's in the replacement pool and its customers get notices. (40 CFR 141.84(d)(6)) (40 CFR 141.85(e)) Identifying the material, line by line or by an approved method, is how the pool shrinks.
Start with what you already have
- Records review: tap cards, service records, work orders, and as-builts.
- Construction dates.
- Pipe diameter.
- Information from customers, where your State accepts it.
Washington lists these as the methods to use first. (WA DOH 331-723)
Record how each material was identified. States can ask to see it, and every determination should be traceable. (WA DOH 331-723)
Look at the pipe
Field checks by excavation, potholing, a camera, or inside the building give a firm answer, done or overseen by system staff. A check has to cover each unknown portion; for a line with both sides unknown, look at both. (WA DOH 331-723)
Washington's statistical method
Washington DOH allows a random-sample method, but only after records and other methods have found no lead service lines, and it must reach at least 95% confidence. (WA DOH 331-723) If you have fewer than 1,500 unknown lines, you inspect 20% of them; above that, a table sets the number (for example, 322 for 2,000 unknowns). (WA DOH 331-723, Table 1) Our sample size calculator does the lookup.
The sample must be picked at random, not by neighborhood or age. If lead or GRR shows up, the remaining lines can't simply be called non-lead; the guidance lays out what to do next. Lines classified this way must be included in a later validation. (WA DOH 331-723)
This guide explains the rules in plain language; it isn't legal advice. Your State's drinking water program has the final word on your system.